Turk Plast upvc Tee 1-1/2″

Description

Turk Plast upvc Tee 1-1/2″

 

Turk Plast Pipe fittings suppliers in Islamabad Pakistan contact +92-322-3540656.  Tee 1-1/2″

 

What is Turk Plast upvc Tee 1-1/2″ ?

 

A UPVC Tee 1-1/2″ Sch 40 serves as a three-way fitting utilized in plumbing and drainage applications, constructed from un plasticized polyvinyl chloride (uPVC). Let’s delve into its primary characteristics:

Applications

• Potable Water Distribution: Commonly used in systems that transport drinking water.
• Wastewater and Sewage Systems: Ideal for drainage, sewage, and vent systems.
• Irrigation Systems: Suitable for both agricultural and landscape irrigation purposes.
• Industrial Piping: Used in transporting chemicals, acids, and other industrial fluids.
• HVAC Systems: Sometimes used in heating, ventilation, and air conditioning systems.

Installation Instructions

1. Preparation:
   • Measure and cut the pipes to the required lengths using a fine-toothed saw or a pipe cutter.
   • Ensure that all cuts are straight and clean.
2. Cleaning:
   • Clean the pipe ends and the inside of the tee fitting with a clean cloth to remove any dust, grease, or other contaminants.
3. Dry Fitting:
   • Temporarily assemble the pipes and the tee without solvent cement to check for proper fit and alignment.
4. Applying Solvent Cement:
   • Apply a thin, even layer of UPVC solvent cement to the outside of the pipe ends and the inside of the tee fitting.
5. Joining:
   • Quickly insert the pipes into the tee with a slight twisting motion to ensure even distribution of the cement.
   • Hold the pipes in place for a few seconds until the cement sets.
6. Curing:
   • Allow the joint to cure for the time recommended by the solvent cement manufacturer, typically 24 hours, before applying pressure or putting the system into use.