POLY FIT UPVC PIPE

Poly fit solvent joint UPVC SYST


UPVC FITTING DETAILS
          ASTM D2466  UPVC SCH-40
Fitting  Pieces Per Carton Fittings Pieces Per Carton
Elbow 45° 116 Yee   2″ 80
Elbow 45° 60 Yee   3″ 24
Elbow 45° 40 Yee   4″ 16
Elbow 45° 12 Yee   6″ 4
Elbow 90° 80 P. Trap    72
Elbow 90° 48 P. Trap    24
Elbow 90° 32 P. Trap    16
Elbow 90° 15 Cleaning I 270
Elbow 90° 8 Cleaning I 72
Elbow Ma 48 Cleaning I 36
Elbow Ma 32 Cleaning I 12
Plug Elbo 40 End Cap   280
Plug Elbo 26 End Cap   90
Plug Elbo 8 End Cap   48
Tee   2″ 60 End Cap   15
Tee   3″ 33 Off Set    20
Tee   4″ 24 Off Set    24
Tee  5″ 11 Socket     123
Tee   6″ 6 Socket     60
Plug  Tee 27 Socket     66
Plug  Tee 18 Socket     21
Plug  Tee 6 Multi Floo 18
M.F  Tee 24
Reduced Pieces Per Carton Reduced Pieces Per Carton
Elbow    3 78 Socket  3″ 80
Elbow    4 34 Socket  4″ 48
Tee        3 40 Socket   4 48
Tee       4″ 32 Bush     3″ 100
Tee       4″ 24 Bush     4″ 60
Tee       6″ 8 Bush     4″ 60
Yee       4 24 Bush     6″ 15
Yee       4 20
Yee   6″/4 6
 Pipes for both PRESSURE and NON-PRESSURE
[schedue 40] and NON-PRESSURE sizes from 2 inch to 8 inches dimension   
SDR SERIES 
SDR-26, SDR-32.5, SDR-64
In B.S. Standard 3505
CLASS B for 6 bar pressure rating pipes commonly applied and installed for house hold sewer systems.
CLASS C for pressure pipe systems commonly used in pressure water installation and it bears 9 bar pressure.
CLASS D  for pressure pipe systems commonly used in pressure water installation, sprinkler, tube well etc and it bears 15 bar pressure.
CLASS M only used in NON-PRESSUE Installation like house hold sewerage installation or drain water application.

DELIVERY  any where in PAKISTAN
CONTACT +92-300-2856741

One thought on “POLY FIT UPVC PIPE

  1. plumbing fittings

    Solder fittings, which are short sections of smooth pipe designed to slide over the outside of the mating tube, are usually used for copper joints. There are two types of fittings: end feed fittings which contain no solder, and solder ring fittings.

Leave a Reply